25mm SNAD Flexible Stud

Part #: SNAD-25STUDF-C
Net Weight: 0.111 oz

25mm flexible stud to be mounted on either flat or radius surfaces and comes with a clear, see through base.

Minimum of 10 pieces

Add to Cart


Quantity Discount
10-99 Pc. $2.75 100-499 Pc. $1.95 500+ Pc. $1.35




  1. Clean the surface with 50/50 alcohol and water where the SNAP is to be applied
  2. Peel off the protective paper backing
  3. Position in place and firmly hold the SNAD socket or stud in place and release
  4. Wait 24 hours and you are done!

​SNADs will adhere to most clean, dry and well-unified surfaces. Typical surface cleaning solvents are a 50/50 Isopropyl Alcohol (rubbing alcohol) water mixture. 
After application, the bond strength increases and approaches the ultimate bond strength after 72 hours at 70°F (21°C). Typical bond strength build-up: 20 minutes equals 50% bond strength, one hour equals 75% bond strength, one day equals 90% bond strength, and three days equals 100% bond strength.

  • Use the adhsesive snap (SNAD) wherever a conventional screw might be used
  • Replace existing screw studs without the need to fill-in the screw hole
  • Use where screw studs are impossible to be mounted because a hole cannot be drilled
  • SNAD adhesive snaps are great for boats, RVs and cargo trailers
  • Use adhesive snaps to hang banners on buildings
  • Much, much, much more!

Our Products