Mesh Pockets with Snap Fasteners
Storage Net Pockets Category • Free Shipping Over $50.00
➜ This product ships same business day if ordered before 11:30am EST.
This lightweight see through net with its small holes can hold both small and large items. It can easily attach to the back of cabinet doors and shelves. Installs in seconds. By using our adhesive backed SNAD fasteners there is no need to screw any holes. The polyester mesh is breathable so that it will allow for things to remain clean, dry, and organized.
Mount the net with stainless screw studs or use our included 3M self-adhesive SNADS. Available for mounting on both flat and contoured surfaces.
- Comes with your choice of either SNAD® self-adhesive or stainless steel screw studs.
- FANTASTIC for cabinet door organization, add valuable storage space to ANY cabinet door.
- Ideal for home, RV and boat use.
- Great for spices inside the cabinet door.
- Use the adhsesive snap (SNAD) wherever a conventional screw might be used
- Replace existing screw studs without the need to fill-in the screw hole
- Use where screw studs are impossible to be mounted because a hole cannot be drilled
- SNAD® adhesive snaps are great for boats, RVs and cargo trailers
- Use adhesive snaps to hang banners on buildings
- Clean the surface with 50/50 alcohol and water where the SNAP is to be applied
- Peel off the protective paper backing
- Position in place and firmly hold the SNAD® socket or stud in place and release
- Wait 24 hours and you are done!
SNAD®'s will adhere to most clean, dry and well-unified surfaces. Typical surface cleaning solvents are a 50/50 Isopropyl Alcohol (rubbing alcohol) water mixture.
After application, the bond strength increases and approaches the ultimate bond strength after 72 hours at 70°Ｆ (21°C). Typical bond strength build-up: 20 minutes equals 50% bond strength, one hour equals 75% bond strength, one day equals 90% bond strength, and three days equals 100% bond strength.
| Material | Polyester |
|---|---|
| Netting Color | Plastic Coated Mesh (PCM) |
| Manufacturer | Made and/or assembled by Obeco Inc. in U.S.A. |
